curve curve

Find Your Next Car curve

 

Changing Spark Plugs Of A Car

A worn out spark plug is a commonly faced problem by the car owners. Sometimes it happens that car just refuses to start due to wearing out of spark plug completely. In that condition, the spark plug is needed to be replaced by a new one. A spark plug can be replaced at home if you follow the below given instructions carefully. Also, if you are not very much into these repairing and replacing thing that you can take help of a skilled mechanic for the same.

1) Taking help of repair manual always fall essential in the replacement of  the components like spark plug. Otherwise, starting off anything haphazardly, you might end up creating an even bigger fault instead of replacing the spark plug.

 

Effective Tips For Cleaning Car Radiator

Radiator is one of the most important components of a car’s engine cooling system and its proper functioning is very important for proper cooling of the engine of a car. It cools down the engine by circulating the water through a number of pipes. Where the water level in the cooling system is recommended to be checked and maintained on a weekly basis, the radiator should be flushed at least on a half yearly basis. Though taking the help of a trained mechanic or a service station for repairing the radiator of a car is the best way to get it fine-tuned, but the same can be performed at home itself if you follow the above given instruction properly.

1) Move your car to an evenly leveled surface and cover-up the engine with the help of a plastic sheet so that the water splashes can be stopped from going where it doesn’t belong.

 

10 Basic Tips For Changing Car Tyre

Tyres are the only component in a car’s whole body that continuously keeps in contact with surface and because of it they remain highly prone to the faults and deformities. That is why, it is very essential for every car owner to have knowledge of how to change a flat tyre. Knowledge not only makes you self dependent but also fall very essential when tyre of your car burst’s out during a long journey. Below are few tips for changing a car tyre.

1) Remember, changing a tyre is not possible without the help of a number of right tools including a jack and a wheel brace.

 

Useful Tips For Painting A Car

Buying a new car is a considerably heavy investment and most people buy it for at least 4 to 5 years as not everyone can afford a new car every other year. No matter how well you maintain the car, its exterior paint starts going dull and peeling-out and there comes a time when the tattered exterior of your car starts embarrassing you. But selling it and buying a new one is not the only solution left when you have a very easy as well as very economical way-out of getting it repainted. You can either get it repainted at a car garage or do the task at your home itself. Painting the car will not only help you in getting rid of any old patches or scratches but will also give the car a completely new avatar. Below are the tips for owners who are planning to paint their car at their home itself.

Preparation:-

 

Alignment Of Car Wheels

Wheel alignment is basically adjustment of the angles of the wheel in order to poise them perpendicular to the ground and parallel to each other. Maintaining the proper alignment of the wheels not only enhances the life of the tyres but also makes the drive of the car smooth. With aligned tyres, car runs straight on roads and the life of tyres increase in a longer run. In addition to this, driving a car with unaligned tyres needs some additional efforts from the driver’s side that can seriously tire out the driver on a long drive.

The proper alignment of car tyres depend on three factors Camber, Caster and Toe. Here is a brief information of these components along with the problems the can create if not aligned.

 

Basic Tips For Adjusting Car’s Carburetor

For a person who drives a car, merely knowing how to drive is not enough as sometime incomplete knowledge about how to deal with little faults can prove highly troublesome. One should have enough knowledge of the tasks with which a car owner encounters most commonly such as changing a tyre or adjusting a carburetor. Below are some easy tips on adjusting a car’s carburetor which will certainly help you in getting full information and performing the task efficiently.

1)Bring the car’s engine on its normal operating temperature by turning it on for a few minutes. Don’t forget to turn the engine off before you start working upon its carburetor.

 

Tips To Hot Wire A Car’s Ignition

Hot wiring is basically starting a car by tapping two wires of cars electrical system together, in case one has lost the keys of his car. The method is most commonly used by thieves or the criminals for stealing the car. You must have seen this type of seen in many movies in which male protagonist try to start the car haphazardly, by joining two wires fixed under the steering. However, hot wiring a car falls very handy in case the ignition system of the car has gone faulty or if someone has lost the keys of his car. Here are few tips to hot wire a car.

1) Before touching any wire, try your luck by taking the help of small screw driver for starting the car. It is advisable to keep an emergency tool kit which contains tools like small screw driver. Insert the screwdriver in the key hole as you insert the key. If you are fortunate enough, the car will get started, otherwise, hot wiring is the only option left.

 

Use Of Nitrogen In Pressurizing Car Tyres

Using the Nitrogen gas for inflating the tyres is a relatively new concept. Thus, one should adopt it or not has always been much debatable topic among the auto experts. Nitrogen is basically a non-toxic gas that is tasteless, colorless and odorless gas that accounts for over 78 percent of the earth’s atmosphere. The Nitrogen gas is used in a number of automobiles to inflate the tyres including racing cars, HCVs (heavy commercial vehicles) and even aircrafts. Where some auto experts say that using Nitrogen is beneficial, there are some who says it has many disadvantages. Here we have tried to pin point some of the pros and cons of using Nitrogen gas for inflating the tyres

Pros:-

 

Tips For Changing Car Timing Belt

Timing belt which is also called the cam belt is basically a chain that is used for interchange of rotary and linear motion when the vehicle needs to maintain a specific drive ratio or has to balance heavy-weight. When it comes to replacing the timing belt, most car owners prefer it to be done with the help of a skilled mechanic as it is not any easy task. However, if you are apt with the car repairing, you can change a speed belt by following a certain procedure. Here are few steps for which will certainly help you knowing the process of timing belt change procedure.

1)First of all remove the connection of battery along with removing the cap of distributor. Keep the position sensor of the Top Dead Center (TDC) as referred in the repair manual.

 

How To Clean Car Battery Terminals

Sometimes, even a thin layer of corroded materials and gunk on or around battery terminals can completely stop the flow of battery current in the car’s ignition system, in result car refuses to start. A gooey substance starts forming on battery due to acid condensation that can not only make the performance of your car troublesome but can also affect the battery life. Thus, whenever, you find this kind of substance on the surface of your battery, its time to give the battery terminals a clean-up. Here are few instructions for the cleaning of battery terminals.

Preparation:- For the effective and safe cleaning of your car battery terminals you will be needing a number of things that comprises of rubber gloves, screw driver, razor blade, stiff-bristled brush, electrical tape, sodium bicarbonate (baking soda) or cola.